Modify Selection
- Products and materials:
- Dusts
- or
- Respirable dust
- or
- Diesel particulate matter
- or
- Coal dust
- or
- Limestone dust
- or
- Silica dust
- or
- Float dust
- or
- Asbestos dust
Home Links
Results 271 - 280 of 344
-
6/1/2002 - Peer reviewed journal articlesExperiments were conducted to determine the optical scattering properties of diesel particulate matter (DPM) and various combustion aerosols from both flaming and smoldering combustion sources at discrete angles of 151 and 301 in the forward direction...
-
6/1/2002 - Peer reviewed journal articlesThe amount of airborne respirable dust generated from breakage of different coals varies widely. This research was conducted to identify the facets of airborne respirable dust liberation from the coal product.
-
2/1/2002 - Peer reviewed journal articlesThis article summarized results of research conducted by the National Institute for Occupational Safety and Health (NIOSH) at its Pittsburgh Research Laboratory. The objective of this work was to determine the correlation between the mass (M) of respir...
-
2/1/2002 - Conference papersNIOSH conducted a strategic planning effort to identify those areas in mining with the greatest research needs. In response, the Pittsburgh Research Laboratory (PRL) has implemented a multi-faceted research program to improve silica dust control for the...
-
2/1/2002 - Conference papersThe ultimate goal of this research is to develop control technologies to reduce worker exposure to respirable silica dust. Dust surveys were conducted in an underground limestone and gold mine to investigate silica dust sources, generation levels, and ...
-
2/1/2002 - Conference papersThis paper examines methods for limiting occupational silica exposures for roof bolting personnel in underground coal mining. It also evaluates a metal rake, a flexible insert, and a rigid insert for cleaning the roof bolter dust collector box.
-
2/1/2002 - Conference papersThis report discusses a cooperative research study performed on a surface drill retrofitted with a new pressurization and filtration system. Respirable dust concentrations were substantially reduced from 0.64 mg/m3 during pre-testing to 0.05 mg/m3 duri...
-
2/1/2002 - Conference papersDiscusses current NIOSH research to improve mine ventilation and mine air quality, particularly for large opening mines.
-
9/1/2001 - Peer reviewed journal articlesThe objectives of this work are to 1) evaluate the performance of the P7 method on field samples of low quartz mass loadings, 2) evaluate the magnitude of dust mass spatial variability within an enclosed cab environment, and 3) estimate the subsequent p...
-
9/1/2001 - Peer reviewed journal articlesA method was developed to estimate the average workplace concentration of DPM that could be expected from using the new lower DPM-emitting engines now being approved by MSHA.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program